JUGS Sports Field General Football Machine - Manual (Page 7)

11
WARNING: To prevent accidental starting or electrical shock that could
cause possible serious injury, assemble all parts to your
machine before connecting it to the power supply. The
machine should never be connected to a power supply when
you are assembling parts, making adjustments, cleaning,
servicing or when not in use.
1. Carefully lift the machine from its carton and place it on a level surface.
2. Make sure you have all the parts (See Figure 3). If any parts are missing,
do not operate the machine until the missing parts are replaced. Failure to
do so could result in possible serious personal injury.
3. Do not discard the packing materials until you have carefully inspected the
machine, identified all the parts and satisfactorily operated the machine.
NOTE:
If any parts are damaged or missing, do not attempt to plug in the power cord
and turn on the switch until the damaged or missing parts are obtained and are
installed correctly.
Unpacking
▲
!
Figure 3
Terminology
10
FLEX SHAFT
CONTROL BOX
SPEED DIAL
ON/OFF SWITCH
POWER CORD
HORIZONTAL T-HANDLE
HUB
WHEEL
PASSING SLIDE
SLIDE STOP
LEG
CRUTCH TIP
LEG T-CLAMP
(LEG CLAMP-NOT
SHOWN, LOCATED
UNDERNEATH BASE)
BASE
MOTOR
MOTOR CAP