JUGS Sports Field General Football Machine - Manual (Page 11)

19 18
Review the following instructions carefully to maintain maximum
accuracy with your JUGS
FIELD GENERAL ™ Football Machine.
Maintain tire pressure at 16 to 17 psi.
Cleaning
• Keep the machine clean, and free of grit and dirt. Always use a clean
damp cloth when cleaning. Never use brake fluids, gasoline,
petroleum-based products, or any solvents, to clean the machine.
• Periodically, you must clean the wheels to help maintain its maximum
performance. Dirty wheels can easily be distinguished by either a
dark ring around the wheel surface or when the surface itself has
turned yellow and has a very glossy or shiny finish.
• Using medium-grade sandpaper (sometimes an even coarser grade
is necessary, depending on the amount of soil buildup), begin to
scrub the tire surface. This process can be very tedious and may
take up to 10 minutes per tire. However, it is necessary to completely
remove all foreign substances from the tires to prepare them for
better machine performance. You should sand the tires whenever
you notice the soil build-up forming. Always sand tires with the power
switch OFF and the machine unplugged.
Once you complete this operation, the tire surface will, in most
cases, take on the white color it was originally. Maintaining the tire in
this fashion will not only maximize the performance and accuracy of
your machine, but it will extend the life of the tire.
Storage
• Always store the machine and extension cord in separate, clean, dry,
secured areas. Cover the machine with a suitable dust cover that
does not retain moisture. Do not use plastic.
Maintenance Product Specifications
JUGS FIELD GENERAL ™ Football Machine
Product Specifications:
Motor Specifications:
Variable Speed
Maximum-developed horsepower ..................................1/4 hp
Volts .............................................................................. 90vDC
Amps ........................................................................ 2.8 amps
Hertz .......................................................................... 50/60 Hz
RPM (no load)............................................................1800 rpm
Overload protection ............................................................ yes
Wheel Specifications:
Size ........................................................................ 4.10/3.50-6
Pressure ....................................................................16-17 psi
Frame Specifications:
Legs ...................................................................... steel tubing
Motor-Mount and Leg-Clamp Casting .............. cast aluminum
Slide .................................................................. cast aluminum
Overall Height.................................................................. 56 in.
Overall Width .................................................................. 39 in.
Overall Weight .............................................................. 95 lbs.
Recommended Generator ........................Yamaha
® EF1000iS
Recommended Balls ................................................................
..........Wilson, Nike, Spalding and Rawlings Leather Footballs
IMPORTANT:
Servicing requires extreme care and knowledge of the machine and
should be performed only by JUGS. For service, we suggest you
return the machine to JUGS for repair. Always use original factory
replacement parts.