Home Easy HE107 - Manual (Page 2)

Dimming:
To dim the HomeEasy Dimmer switch manually, switch on the lights and
then press and hold the touch sensor, the dimmer will now enter the
dimming cycle, to select the required level release the touch sensor.
To change direction of the dimming cycle release the button and then
press and hold again.
Manual Operation:
Switching ON/OFF:
To switch the HomeEasy light switch "ON" press the touch sensor once
and, press the touch sensor again to switch the unit "OFF".
Touch Sensor
LED
Up to Six remote control units can be paired with each HomeEasy Dimmer
Switch. To program the dimmer switch, switch the lights On and Off six times.
Deleting Remote Control:
To delete a remote control that has been paired with a dimmer switch, simply
switch the lights On and Off six times. The LED will start to blink and lights will
dim up and down in steps; press the "Off" button on the remote control, the
lights will flash on and off to confirm that the remote control has been
removed from the dimmers memory. A second remote control can now be
deleted from the dimmer switch or press the touch sensor to exit the mode.
Channel reset:
To delete all the remote control units from the memory of the dimmer switch,
switch the lights On and Off six times, the LED will start to blink and lights will
dim up and down in steps, switch the lights On and Off a further six times. The
lights will flash on and off, to confirm that the memory has been reset, press
the touch sensor to exit the reset mode.
Pairing with Remote Control:
The LED will now start to flash and lights will dim up and down in steps, now
press the "ON" button on the remote control, the lights will flash on and off, a
second remote control can now be paired to the dimmer switch or press the
touch sensor to exit the pairing mode. The units are now paired together, you
can test this by pressing the selected "ON/OFF" button on your remote
control.
Always refer to the original instruction when using with additional products
Remote Control Operation:
6X
6. Ensure that all wires are fully sleeved and that only enough bare is
available to connect to the terminal. All wire must be fully inserted into
the terminals and fully tightened, so that the wires are secure and no
bare wires are protruding.
Dimmers with a metal cover plate must have an earth by means of the
earth connect point on the dimmer module
7. When the wires are connected, gently screw the dimmer unit into the wall
box, making sure that the plastic spacer is correctly aligned and that no wires
are trapped between the switch and the back of the wall box.
8. Replace the cover plate and restore the mains electrical supply.
The dimmer now needs to be activated. Press and hold the each of the
touch button(s) for 2 seconds to initialise the dimmer.
9. The dimmer now needs to be paired with a HomeEasy Remote control
- See Pairing/Deleting With Remote Control.
The HomeEasy Dimmer Switch is compatible with all HomeEasy Remote
Controls except the HE200 Programmable Timer Remote Control.
C H Byron
34, Sherwood Rd
Aston Fields
Bromsgrove
B60 3DR
Contact Details:
433MHz
R&TTE
APPROVED
CH Byron Electrical United Kingdom. www.chbyron.com
A
B
DK
FIN
F
D
GR
LT
IRL
I
L
NL
P
E
S
UK
BG
CZ
EST
H
IS
LV
M
N
SK
SLO
CH
PL
RO
0560
Tel: 0845 2301231
Fax: 01527 557701
Web: www.chbyron.com
E-mail:
[email protected]
Contact: Helpline: 0845 2301 231
PLASTICS
10 - 15%
BRICK
10 - 40%
TIMBER CONCRETE METAL GLASS
40- 80% 10 - 40% 90% 5 - 15%
Range Reduction Guide:
The operating distance is 25 Metres
1Gang Dimmer Switch: HE-107
Input: 230V ~50Hz
Load: 400W Max
Min:40W
Range: 25 Metres (Open Distance)
Frequency: 433.92MHz
Indoor Use Only
Warning: Never Exceed the Product Specification
Product Specification:
2Gang Dimmer Switch: HE-108
Input: 230V ~50Hz
Load: 250W Max
Min:40W
Range: 25 Metres (Open Distance)
Frequency: 433.92MHz
Indoor Use Only
The radio operating distance is reduced when the signal has to pass through
solid objects and the material type
i.e. internal walls.
Tip: Using a plastic wall (back)box will increase the operating range of the
dimmer switch.
Live
S
Wire Free Antenna
Earth Point
Plastic Spacer
Liv e S Liv e S
1 Gang Dimmer:
2 Gang Dimmer:
Dimmer Module A