beautypg.com

Home Easy HE301 User Manual

He-301 remote control key fob, Easy

background image

Pairing/Deleting Remote Control & Receiver Socket:

C H Byron

34, Sherwood Rd

Aston Fields

Bromsgrove

B60 3DR

Contact Details:

433MHz

R&TTE

APPROVED

CH Byron Electrical United Kingdom. www.chbyron.com

A

B

DK

FIN

F

D

GR

LT

IRL

I

L

NL

P

E

S

UK

BG

CZ

EST

H

IS

LV

M

N

SK

SLO

CH

PL

RO

0560

Tel: 0845 2301231

Fax: 01527 557701

Web: www.chbyron.com

E-mail:

[email protected]

Product Specification:

HE-301 Remote Control

Key Fob

V1.0

The HE-301 remote control is a expansion unit for
the home Easy range of products and is designed
to work with all the HE products.
Additonal Home Easy receiver products are
required for the HE-301 to work.

Remote Control:
Battery: 3v Cr2032
Range: 30 Metres (Open Distance)
Frequency: 433.92MHz
Indoor Use Only

Warning: Never Exceed the Product Specification

Contact:

Helpline: 0845 2301 231

Product Compatability:

The HE-301 Remote Control Key Fob is compatiable with all HomeEasy
Receiver sockets and modules.

Changing Battery:

The HE-301 uses a single CR2032 battery:
Remove move the battery holder form the bottom of the remote control, using
a small screw driver. Remove the battery from the holder and replace with a
new battery, making sure the polarity match's the internal markings.

Up to Six remote control units can be paired with each receiver socket or
module. To program a socket insert the unit into a plug socket and switch on
the power, now press the "Learn" button. The LED will start to flash, now press
the "On" button on the Key Fob, the LED will stop flashing. The units are now
paired together, you can test this by pressing the "On/Off" button.

Always refer to the original instructions when using with additional products

Deleting Remote Control:
To delete a remote control that has been paired with a remote control
receiver socket or module, simply press "Learn" button. The LED will start to
blink; press the "Off" button on the remote control, the LED will blink twice
to confirm that the remote control has been deleted from the receiver
sockets memory.

Pairing/Deleting with Remote Control:

HOME

easy