HITEC Focus Heli 5 FM - Manual (Page 5)

4. Reciever & servo connections
5. Operation & adjustment
A. Control stick length & tension & trim lever adjustment
The unique open-stick assembly
provides fully adjustable stick tension
“feel”. Turning the tension adjustment
screw counter clockwise will soften
(decrease the tension) the feel of the
Control stick (fig 3)
CP- varible resistors improve the
neutral characteristics and resoulution]
of the servo positioning.
All of the molded parts are
fabricated from high-grade
polycarbonate that is unaffected by
temperatur and humidity.
The length of the nonslip control sticks
can be adjusted to suit the requirements
of the operator. (fig 4)
Remove the transmitter rear
cover and open the P.C. Board. fig 3
Turn with a Phillips
screwdriver
The spring becomes
stronger when the
screw is turned
clockwise
4
fig 4
fig 2
Adjusting knob
•
Unlock
•
Set to the desired length by
turning the knob, then lock.