HITEC Focus Heli 5 FM - Manual (Page 3)

2. Features & specifications
A. Transmitter
• 5 channel P.P.M/F.M. transmitter
•
AMA listed 1991 F.M. system and RCMA gold stickered transmitters
•
High Quality precision gimbal stick with adjustable length & tension
•
Accurate smooth-operating electronic control sticks
•
All channel servo reversing
•
ATV for aileron, elevator
•
Channel 5 for gear switch
•
Hovering pitch control
•
Hovering throttle control
•
Pitch curve high/low rate control
•
Revolution up/down rate control
B. Receiver (Ultra series)
•
X-TAL interchangeable
•
Ultra narrow band width for maximum adjacent channel rejection
•
Minimized 2nd & 3rd order intermodulation
•
Metallic noise proof
Operating system : 2 stick system
Module change system :Internal module system
Power supply :9.6V (8 Ni-Cad batteries)
Current drain :150mA (13.5) -130mA (10.8)
C. Servo
•
Top oilite bearing prevents wearing out of the top plastic case
•
Indirect drive for gear train protection
•
Hitec custom designed I.C. with narrow dead band & high trackability
•
SMT (Surface Mount Technology) circuitry adopted
Intermediat e frequency :455KHz, 10.7MHz
Poweer supply :4.8V (4 Ni-Cad battery) AA size
Current drain :22mA
Dimensions :37x61x22mm (1.5”x2.4”x0.9”)
Receiving range :3000 ft or greater in the air
Working voltage :3.7 - 7.0V
Control system :+ pulse width control (1550 uS/N)
Operating angle :One side 45deg or more (including trim)
Power supply :4.8V (4 Ni-Cad) or 6V (4 Alkaline battery) AA size
Current drain :8mA at 6.0V (stopped)
Output torque :3.0kg/cm (41 oz/in)
Operating speed :0.21 sec/60deg
Dimensions :41x20x36mm (1.6”x0.8”x1.4”)
Weight 1.51oz (43g)
2