Hase Lima - Manual (Page 37)

37
11. Technical Data
The Lima B.11, certified in compliance with DIN-EN 13240 : 2005-10/1 : 2008-06
and Art. 15 a B-VG (Austria), can only be operated when the fire box is closed; more
than one device can be connected to the chimney. VKF-No.: 22674;
The following data applies to the chimney characteristics in accordance with EN
13384-1 / 2
Combustion Values Wood Briquette
Nominal Thermal Output 6 6 kW
CO content at 13% O2 80 79 mg/m³
Efficiency 13 26 %
CO content at 13% O2 1104 882 mg/m³
Waste Gas Mass Flow Rate 5,5 5,5 g/s
Waste Gas Outlet Temp. 320 320 ˚C
Min. Supply Pressure at Nominal Thermal Output 12 12 Pa
Depending on the insulation of the building, the nominal thermal output of 6 kW indi-
cated on 20 - 80 m² (subject to change).
Dimensions: Height Width Depth
Stove 121 cm 48 cm 48 cm
Fire box 43 cm 28 cm 30 cm
Weight (ceramic / soapstone): 178/214 kg
Flue pipe diameter: 15 cm
Pipe diameter of Hase ventilation system* 10 cm
* For separate air supply in low-energy houses and insufficient combustion air supply
in the room where the stove is installed
Front view Side view
Top view
Dimensions in cm
Connection area for the
inst. of Hase air system
below
Stove‘s angle of rotation:
180° · Can be stopped in
place and locked right/left in
15° gradients. Observe safety
distances to combustible or
flammable materials!
Stove height: 121
Height for top installation: 113
24
Ш 35 6,5
Ш 48
Height for the inst. of Hase air system: 9