DYSON DC07 - Manual (Page 13)

Emptying the Clear bin
TM
Shroud cleaning
(when necessary)
To remove any build-up of lint or
large dust particles on the shroud:
A Press the bin release catch to
remove the Clear bin. TM
B Clean the shroud with a cloth
or dry brush to remove the
lint and dust.
CAUTION
• Do not use the machine
without the Clear bin TM in
place.
To reassemble the Clear bin, TM
place on the floor with the Clear
bin
TM base closed.
C Holding the carry handle, put
the cyclone assembly inside the
Clear bin,
TM line up the front
and rear catches, and push
down to click the catches into
place.
D Ensure the Clear bin TM is
secure before replacing on
the machine.
The British Allergy Foundation is a
UK national charity with the aim of
improving awareness, prevention
and treatment of allergies.
The British Allergy Foundation Seal
of Approval is a UK registered
trademark.
Clear bin TM cleaning
(optional)
IMPORTANT
• You may rinse the Clear bin TM
with water. Rinse only the
Clear bin
TM – do not rinse the
inner cyclone, shroud, or
cones.
• Do not use detergents.
• Do not immerse any other
part of the machine in water.
• Ensure the Clear bin TM is
completely dry before
replacing.
A
B
C
D
tip
www.dyson.com
Clear bin TM will not come off
cyclone unless the bin base
is open.
13
www.dyson.com
16852_DCO7_OP_MAN_US.qxd 5/7/07 14:00 Page 13 (Cyan plate) (Magenta (PANTONE plate) (Yellow plate) (Black plate) Red 032 C plate)
10:39:28 2007-07-06 C_16852_DCO7_OP_MAN_US_4c1s.pdf