Hanna Instruments HI 98509-01 - Manual

Checktemp ® -Dip
HI 98509-01 • HI 98510-01
Precision Thermometers
with a Stainless Steel
Weighted Probe
Dear Customer,
Thank you for choosing a Hanna product.
Please read carefully this instruction manual be-
fore using the instrument. If you need additional
technical information, do not hesitate to e-mail us
at [email protected].
These instruments are in compliance with the
directives. PRELIMINARY EXAMINATION
Remove the instrument from the packing material
and examine it carefully to make sure that no
damage has occurred during shipment. If there is
any damage, immediately notify your Dealer.
Each meter is supplied complete with battery and
instructions.
Note: Conserve all packing material until the in-
strument has been observed to function
correctly. Any defective item must be re-
turned in its original packing.
SPECIFICATIONS
Range -20.0 to 100.0°C / -4.0 to 212°F
Resolution 0.1°C
0.1°F (-4 to 199.9°F) / 1°F (200 to 212°F)
Accuracy
±0.5°C (-20 to 50°C) / ±0.9°C (outside)
±0.9°F (-4 to 122°F) / ±2°F (outside)
Probe Stainless steel, 3 m (9.9’) cable
Environment 0 to 50°C (32 to 122°F);
RH 95% max
Battery Type 1x1.5V AAA alkaline
Battery Life Approx. 3 years of use
Dimensions 106 x 58 x 19 mm (4.1x5.2x0.7")
Weight 80 g (2.8 oz.)
w w w . h a n n a i n s t . c o m
GENERAL DESCRIPTION
Checktemp ® -Dip is an accurate thermometer
provided with a fixed stainless steel probe with a 3
meter (9.9’) cable, and weighted so that it can be
dipped into any vat and tank and measure the tem-
perature at different depths.
Due to its hygienic stainless steel probe, it is ideal
for food applications, especially to check the tem-
perature inside wine casks and milk tanks.
Checktemp ® -Dip can also be used for applications,
such as fish farms, water reservoirs and pools where
the operator can simply stand on the edge of the
water and throw the probe over.
The accuracy, in spite of the longer probe lead, is
an excellent ±0.3°C (±0.5°F).
In addition, you can check to make sure that your
thermometer is measuring the right temperature with
the Hanna Instruments’ exclusive Cal-Check
®
technology.
Two models are available:
• HI 98509-01 (
Checktemp ® -Dip C) reads tempera-
ture in °C unit
• HI 98510-01 ( Checktemp ® -Dip F ) reads tempera-
ture in °F unit