Hanna Instruments HI 9810 - Manual (Page 3)

5
4
HI 9810
Range pH 0.00 to 14.00
mg/L 0 to 3000
µS/cm 0 to 6000
Resolution pH 0.10
mg/L 10
µS/cm 10
Accuracy pH ±0.20
(@20°C/68°F) mg/L ±2% f.s.
µS/cm ±2% f.s.
Conversion Factor 1µS/cm = 0.5 mg/L
Typical EMC pH ±0.10
Deviation mg/L ±2% f.s.
µS/cm ±2% f.s.
pH Calibration Manual 1 point through
offset trimmer
Offset Calibration ±1.5 pH
EC/TDS Calibration Manual 1 point through slope trimmer
EC/TDS Temperature Automatic from 0 to 50 C (32 to 122 F)
Compensation with a ß of 2%/ C
Electrode HI 1285 combination pH/EC/TDS
electrode with temperature sensor
and 1 m (3.3') cable ( included)
Battery Type 9 Volt
150 hours of continuous use
Environment 0 to 50 C (32 to 122 F);
max 95% RH non-condensing
Dimensions 185 x 82 x 45 mm
(7.3 x 3.2 x 1.8")
Weight 520 g (1.1 lb.)
SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS FUNCTIONAL DESCRIPTION FUNCTIONAL DESCRIPTION FUNCTIONAL DESCRIPTION FUNCTIONAL DESCRIPTION FUNCTIONAL DESCRIPTION
1) LCD display
2) pH range selection key
3) µS/cm (EC) range selection key
4) EC/TDS calibration knob
5) ON/OFF key
6) mg/L (TDS) selection key
7) pH offset calibration knob.