Hanna Instruments HI 83203 - Manual (Page 12)

12
DATA MANAGEMENT
The instrument features a data log function to help you keep track of all your analysis. The data log can
hold 200 individual measurements. Storing, viewing and deleting the data is possible using the LOG
and RCL keys.....
Storing data: You can store only a valid measurement. Press LOG and the last valid measurement will be
stored with date and time stamps.
Viewing and deleting: You can view and delete the data log by pressing the RCL key. You can only delete
the last saved measurement. Additionally, you can delete the data records all at once.
• Turn the instrument ON via the ON/OFF power switch.
• The meter will perform an autodiagnostic test. During this test, the Hanna Instrument logo will appear
on the LCD. After 5 seconds, if the test was successful, the last method used will appear on the display.
• In order to select the desired method press the METHOD key and a screen with the available methods
will appear.
• Press the keys to highlight the desired method. Press Select.
• After the desired method is selected, follow the measurement described in the related section.
• Before performing a test you should read all the instructions carefully.
METHOD SELECTION