Dixon ZTR 7525 - Manual (Page 26)

26
OPERATION INSTRUCTIONS
TO FREE WHEEL MACHINE
(UNLOCK TRANSMISSION):
Always turn off engine before engaging or disengaging the
hydro release (free wheel) valves. Never attempt to move
the valves with the engine running.
The hydro release valves are located behind the seat,
between the fuel tank and hydro pumps. Use a 5/8”
wrench and insert through the slots on the top side of the
seat plate and rotate bolt counter-clockwise two full turns
to disengage pump. Repeat procedure for opposite pump.
To engage, rotate each pump bolt clockwise until bolt is
snug.
Note: Before pushing or towing tractor, the transmis-
sion must be unlocked, and parking brake re-
leased. The tractor should never be pulled at
more than two miles per hour or for any appre-
ciable distance.