Hanna Instruments HI 96821 - Manual (Page 9)

9
TO CHANGE MEASUREMENT UNIT TO CHANGE MEASUREMENT UNIT TO CHANGE MEASUREMENT UNIT TO CHANGE MEASUREMENT UNIT TO CHANGE MEASUREMENT UNIT
Press the RANGE key to select measurement units. The instrument toggles between the four
measurement scales each time the key is pressed and the primary display indicates “G-G” for
g/100 g, “G-L” for g/100 mL, “S.G.” for Specific Gravity and “bAU” for °Baumé. When the
instrument displays the screen with 4 dashes, the instrument is ready for measurement. A
number on the display indicates the selected unit: “1” denotes g/100 g, “2” denotes g/100 mL,
“3” denotes Specific Gravity and “4” in the secondary display denotes °Baumé (as indicated on
the instrument cover).
Note: Temperature is not displayed in °Baumé mode.
8 seconds
TO CHANGE TEMPERATURE UNIT TO CHANGE TEMPERATURE UNIT TO CHANGE TEMPERATURE UNIT TO CHANGE TEMPERATURE UNIT TO CHANGE TEMPERATURE UNIT
To change the temperature measurement unit from Celsius to Fahrenheit (or vice versa), follow this
procedure.
1. Press and hold the ON/OFF key continuously for approximately 8 seconds. The LCD will
display the “all segment” screen followed by a screen with the model number on the primary
display and the version number on the secondary display. Continue pressing the ON/OFF
key.
2. While continuing to hold the ON/OFF key, press the ZERO key. The temperature unit will
change from °C to °F or vice versa.
°C or °F