Hanna Instruments HI 98701 - Manual (Page 16)

31 30
Recommendations for Users
Before using these products, make
sure that they are entirely suitable
for the environment in which they
are used. Operation of these instru-
ments in residential area could
cause unacceptable interferences to
radio and TV equipments, requiring
the operator to take all necessary
steps to correct interferences.
Any variation introduced by the user
to the supplied equipment may
degrade the instrument's EMC per-
formance. To avoid electrical shock,
do not use these instruments when
voltages at the measurement sur-
face exceed 24 Vac or 60 Vdc.
To avoid damages or burns, do not
perform any measurement in mi-
crowave ovens.
All Hanna Instruments meters are warranted for two years against
defects in workmanship and materials when used for their intended
purpose and maintained according to instructions. The electrodes
and the probes are warranted for a period of six months. This
warranty is limited to repair or replacement free of charge.
Damages due to accident, misuse, tampering or lack of prescribed
maintenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the failure. If the repair is
not covered by the warranty, you will be notified of the charges
incurred. If the instrument is to be returned to Hanna Instruments, first
obtain a Returned Goods Authorization number from the Customer
Service department and then send it with shipping costs prepaid.
When shipping any instrument, make sure it is properly packaged for
complete protection.
Hanna Instruments reserves the right to modify the design, construction and
appearance of its products without advance notice.
WARRANTY
CE DECLARATION OF CONFORMITY
Windows ® is registered Trademark of "Microsoft Co."
HI 710005 115 Vac / 12 Vdc voltage adapter, US plug
HI 710006 230 Vac / 12 Vdc voltage adapter, European plug
HI 710031 Rugged carrying case
HI 710034 Paper Roll (10 pcs)
HI 710035 Ink cartridge
HI 9200 Infrared transmitter (for HI 98801 and HI 98804)
HI 92000 Windows ® compatible software for data transfer to PC
(for HI 98801 and HI98804)
ACCESSORIES
1.5mm
0.06"
255mm
10"
1m
3.3’
2mm
0.08"
35mm
1.4"
Max.
360mm
13.8"
220mm
8.5" 5mm
0.2"
HI 766E2 General use probe, max 900°C/1650°F
HI 766F High temperature wire probe without handle, max 1100°C/2000°F
HI 766F1 Flexible probe without handle, max 480°C/900°F
HI 766TV1 Pipe clamp probe, max 200°C/390°F