Hamilton Buhl HDV5200 - Manual (Page 20)

19
Motion Detection
To enable Motion Detection:
In Movie/Picture Record Mode, press OK Button to switch to record menu screen. 1.
Use Right/Left Buttons to select 2. Smart Function Mode. Submenu of Smart Function Mode will pop
out on the screen.
Use Up/Down Buttons (Tele-Wide Buttons) to select Motion Detect then press OK Button to switch 3.
to Motion Detect submenu.
Use Up/Down Buttons to choose ON or OFF. 4.
Press OK Button to validate the setting and exit. 5.
Camera will start to record video once if there is a movement for 3 consecutive seconds. Stop 6.
recording if there is no movement for 3 seconds.
Display Screen Motion Detect Option
OK Button