Hall Research VHD-PCTV - Manual (Page 6)

VHD-PCTV
4
Figure 3 - Front Panel
Figure 3 - Rear Panel
Figure 3 - Side Panel
Figure 4 - Top Panel
2. Hardware
2.1 Operation
1. Connect Input from PC.
2. Connect 5v power.
3. Connect video output via S-
Video or Composite cable.
4. Select Overscan or Underscan.
5. Select NTSC or
PAL format.
6. Turn unit On/Off via Power button. LED indicates device
power status.
a. Green LED
– Unit Ready. Press and hold power
button to put in standby.
b. Red LED
– Unit is in standby. Press power button to
make active.
c. LED off
– Unit has no power .