Hall Research TBC-100 - Manual (Page 3)

Video Time-base Corrector
3
1
2
3
1
2
3
3.0 Control and Functions
Input Video System Indicator
A. Auto input mode detection
S. SECAM
PN. PAL N
PM. PAL M
P. PAL
(B,D,G,I,K)
N4. NTSC 4.43
N. NTSC 3.58 (e.g. USA)
Picture Adjustment Controls
Select:Press this button repeatedly to choose the adjustment you wish to do.
Each depression of the button will toggle through adjustment controls as
follows:
System
→
Contrast
→
Brightness
→
Color
→
Tint
→
Sharpness
+ : Press the button for adding picture effect selected
- : Press the button for reducing picture effect selected
Reset: When pressing reset button, the setting of the selected control will be
reset to its default value. If you press reset for over 3 seconds, all controls will
be reset to their factory default values.
Auto/Manual detection mode: Press the " Select " button to choose " System"
function on the top row LEDs. And then press Reset button to switch between
Auto and Manual detection mode for the input.
Picture Adjustment Indicator LEDs
4.0 Video and Power Connections
Use only one of the input
connectors, either S-Video or
Composite Video. The TBC-100 will
automatically detect the active one. If
both inputs are connected and active,
the S-Video has priority.
Both video outputs are active and available for use; use either one or both
if you wish.
Use only supplied or approved power adapters. The input power can range
anywhere from 7.5VDC to 15 VDC (Center Negative). Nominal power
usage is 7.5 Watts.