Hall Research UV8-S - Manual (Page 6)

Model UV4-S and UV8-S
4
2. Installation
2.1 Package Contents
Your package should contain the following items:
(1) UV4-S or UV8-S
(1) Universal power supply (9 VDC) with IEC320 Power Cord
(1) 6 ft HD15-M-M VGA cable
(1) User manual
(1) Screwdriver
2.2 Connection to Compatible Receivers
The UV4-S and UV8-S units have a single UTP cable connection to Hall Research’s
UV1-R receiver product line.
‰
Connect the UTP cable from the UV1-R receiver to the “UTP OUT”
connectors of the UV4-S or UV8-S.
‰
Connect the HD15 - “PC/HD IN” connector to the video source. For YPbPr
video sources, use a 3-RCA to HD15 cable (Hall Research P/N CHD15-
RGB).
‰
Connect the HD15-“PC/HD OUT” connector to a compatible video display.
‰
Connect the included power supply to the center positive +9 VDC power
input connector on the UV4-S or UV8-S.
o If the UTP cable to the UV1-R receiver is
longer than 330 ft (100m) then a power
supply may be needed at the receiver
(sold separately HR Model # 511-GS569).
‰
Never use any other power supply as this may
damage the device.