beautypg.com

Configuration & operation – Hall Research UV232-16X User Manual

Page 9

background image

UV-16 Family of Mini-Cat

®

Senders

7

3. Configuration & Operation

3.1 Sender

At the sending end the video signal from the source is fully terminated.
On the UVA-16X, the transmitted audio in the CAT5 cable to the
remote receiver is monaural. The audio output on the receiver is “line-
level” (powered speakers are required).

3.2 Receivers

Several receiver types are available that are compatible with this family
of products (See table for compatible receivers). All Receivers have a
single COMPENSATION potentiometer (pot) adjustment to recover
high frequency signal loss for long runs of the cable.

Model #

Compatible Receivers

UV1-S-16X *

UV1-R

UV1-R-WP (Wall Plate)

UVB1-CP-R

UVA-16X

URA

URA-X2

UV232-16X

UR232

UR232-X2

* IMPORTANT

The UV1-S-16X sends 9 vDC via the CAT5 cable and is only
compatible with the UV1-R, UV1-R-WP and UVB1-CP-R.

Other types of receivers (Such as a URA) can sustain damage if
connected to the UV1-S-16X