Hall Research EM-EDID-HD15-P - Manual (Page 2)

EM-EDID-HD15 Users Manual
4.0 Resolutions Supported
The EDID emulator reports itself as an LCD that can support the following
resolutions:
640x480 @ 60 Hz, 67 Hz, 72 Hz, 75 Hz
(Aspect 4:3)
720x400 @ 70 Hz, 88 Hz
(Aspect 16:9)
800x600 @ 56 Hz, 60 Hz
(Aspect 4:3)
832x624 @ 75 Hz
(Aspect 4:3)
1024x768 @ 60 Hz, 70 Hz, 75 Hz, 87 Hz
(Aspect 4:3) (Preferred #2)
1280x1024 @ 75 Hz, 85 Hz
(Aspect 5:4)
1152x870 @ 75 Hz
(Aspect 4:3)
1280x720 @ 60 Hz
(Aspect 16:9 same as 720p)(Preferred #1)
1280x800 @ 60 Hz
(Aspect 16:10)
1368x768 @ 60 Hz
(Aspect 16:9 native on some LCD TVs)
1440x900 @ 60 Hz
(Aspect 16:10)
1600x900 @ 60 Hz
(Aspect 16:9)
1680x1050 @ 60 Hz
(Aspect 16:10)
1920x1080 @ 60 Hz
(Aspect 16:9 same as 1080p)
1920x1200 @ 60 Hz
(Aspect 16:10)
2048x1152 @ 60 Hz
(Aspect 16:9)
2048x1536 @ 60 Hz
(Aspect 4:3)
• Other resolutions can be programmed by Hall Research upon
customer request for a nominal fee
• Hall Research also offers stand-alone programmers (USB-EDID and
USB-EDID-PRO). They can be used to read the EDID from any LCD or
edit custom EDID using PC software.
5.0 Power Requirements
This device requires that the VGA source supply 5 Volts DC on its PIN #9. This is a
standard for VGA connectors. However, some older PC’s and external accessory
VGA devices (such as VGA switches, splitters, etc) do not have power on Pin #9.
There is a green LED on the EDID emulator that indicates the unit has 5 vDC applied.
If the green LED does not illuminate, then either a different cable (one that has Pin 9)
or a power supply will be required.
For devices that do not have 5 vDC on pin #9, HRT offers a EDID kit with a power
supply (-P option).
Note: Only connect regulated 5 vDC to the unit.
The power supply is also available individually for those who have bought one without
a power supply and found out later they need it.
EM-EDID-HD15 EDID Emulator without Power Supply
EM-EDID-HD15-P EDID Emulator with Power Supply
511-DSA-5P-05 EDID Emulator Power Supply
USB-EDID VGA EDID Reader/Programmer
USB-EDID-PRO VGA, HDMI, DVI EDID Reader & Programmer