Gryphon Kalliope User Manual
Page 17
17
Win8 32-64bit, can be downloaded at:
www.gryphon-audio.com .
12V LINK IN/OUT:
+12VDC on this 12V link INPUT brings the Kalliope DAC
from Standby to ON mode. The Kalliope DAC reenters
Standby mode when the +12VDC voltage is no longer
present.
The 12V link OUTPUT connector, outputs +12VDC when
the Kalliope is ON.
Mini Jack Mono connectors with + on the tip are to be
used.
Left channel Analog outputs:
Single-ended RCA and balanced XLR*.
CHGND (chassis ground) connector.
* XLR: PIN1: GROUND, PIN2: POSITIVE, PIN3: NEGATIVE