Grandview PT-H(Tripod Charming Screen) - Manual (Page 4)

3 4
Locked
condition
Housing
position lock
Lock
Unlock
Unlocked
condition
Lock
Unlock
Lock
Unlock
Figure 7 Figure 8
Figure 9 Figure 10
Figure 11 Figure 13
Figure 12
Figure 14
Figure 15
5. Displaying the screen:
Method 1: Lift and hang the Stainless bar ring onto the Plastic hook. (Figure 7-8)
Method 2: Raise the extension rod and secure by hooking rig over gooseneck, lift the screen fabric
and hook it on the one of the slots in the eliminator. You could choose from the three slots according
to the degree of tilt of the surface. (Figure 9 - 10)
6. To meet different viewing height (from floor to housing), you can adjust the position of housing via
the Plastic handle. (Figure 11)
Method: Turn the lock button to Unlock position, unlock the plastic handle, lower down the
housing by pulling down the plastic handle to desired position , then lock the plastic handle.
(Figure 12-13)
7. Grasp bottom bar firmly with one hand, grasp and raise adjusting bar with another hand. (Figure 14)
Remarks: You don't need to press the Magic button while raise the Adjusting uphold bar. The screen
viewing area can display in 1:1, 4:3 or 16:9 format according to different height of Adjusting uphold
bar and height of housing.
Special Housing adjusting system
If the housing is a little inclined when fully displayed, it could be adjusted by adjusting the Housing
level adjusting mechanism. (Figure 15)
Housing level adjusting
mechanism