Grandview LF-PU(Large-Flat Prestige 80 mm Series) - Manual (Page 3)

2 5
1. Locate Horizontal frames and Side frames on tidy flat surface. (Figure 1)
2. Slide Fixing lugs into grooves on reverse side of frames and align with arrows. (Figure 2-3)
Figure 1
3. Connect Horizontal frame and Side frame with Corner bracket, adjust the Corner bracket to match screw
holes on frame and Corner backet, then fix with the Corner bracket screws. Same way to other 3 Corner
brackets installtion. (Figure 4-7)
Cor ner
9. To tear down the screen, please press the Secure buttons towards wall to release bottom frame from
groove B, then uplift the screen little to release it totally from up groove & bottom groove of the brackets.
(Figure 23-24)
8. Uplift the assembled screen to make sure Up groove meet with Top bracket, and Down groove meet with
Bottom bracket, the Secure button would lock into Groove B because of spring tension when frames are
matched on brackets ideally. (Figure 21-22)
Up groove
Bottom groove
B
B
Take out all the parts from the packaging and follow the accessories guideline to ensure you have all parts,
then install the screen as below.
Installation
Side frame
Horizontal frame
Figure 2 Figure 3
Fixing lug
Side frame
Horizontal frame
Figure 4 Figure 5
Figure 6 Figure 7
Figure 21 Figure 22
Figure 23 Figure 24