Go Power! GP-SW300 - Manual (Page 8)

Pure Sine Wave Inverter
GPSW-150
GPSW-300
___________________________________________________________
8
Rear View
Operation of the inverter without a proper ground
connection may result in an electrical safety hazard.
a. Ventilation port:
Do not obstruct, allow at least 1 inch (2.54 cm) for air flow.
b. Connect the chassis ground to the vehicle chassis using a #8 AWG
wire.
c. DC Input:
Included: 4 foot (1.22 m) cable with Anderson Power Pole connectors.
Use the battery terminals to connect to battery or other power source:
black is negative
(–), red is positive (+). A reverse polarity connection will blow the
internal fuse and may permanently damage the inverter. Observe the
DC Input rating.