Glow-worm Clearly Heat Pump - Buffer Vessel - Manual (Page 4)

4
Important Information
WARNINGS
Metal Parts
This buffer vessel contains metal parts (components) and care should be taken when handling and cleaning,
with particular regard to edges.
Sealed Components
Under no circumstances must the user interfere with or adjust sealed parts.
General
Further documents apply in combination with this installation
manual.
We accept no liability for any damage caused by failure to
observe these instructions.
Installation, commissioning and maintenance to the unit must
only be carried out by a competent person.
Control of Substances Hazardous to Health
Under Section 6 of The Health and Safety at Work Act
1974, we are required to provide information on substances
hazardous to health.
The adhesives and sealants used in this appliance are cured
and give no known hazard in this state.
Frost protection
The vessel must be completely drained if it is to be shut down
for a long period of time in an unheated room (winter holidays
etc), unless the heat pump circuit contains the necessary
amount of glycol antifreeze (available as a G-w accessory)
Documents
All installation manuals of the components of the installation
must be observed when installing a closed hot water central
heating system. These installation manuals are included
with the individual parts of the installation and the ancillary
components.
Please pass this installation manual on to the owner of the
system in order for him or her to store it so that it is available
whenever it is required.
Manual Handling
With regards to the “Manual Handling Operations, 1992
Regulations”, the product exceeds the recommended weight
for a one man lift.