Glow-worm Betacom2 - Manual (Page 13)

0020145066_01 - 02/12 - Glow-worm - 11 -
HOW TO USE YOUR APPLIANCE
triangle (6) lines up with the current
time.
8.6.2 Setting the programme “ON and
OFF” times.
• Refer to diagram below.
• Select the ON times by pushing the black
tappets to the outside (4).
• Select the OFF times by pushing the
black tappets to the inside (3).
• Position the selector switch (5) to the
middle position .
The heating will now operate your chosen
programme.
8.6.3 To override the timer.
• Move the selector switch (5) to the I
position and the heating will operate
continuously.
• Move the selector switch (5) to the 0
position to switch the heating OFF.
1
2
3
4
5
6
Key
1 24 hour clock dial
2 Minute hand
3 Off tappets to the inside
4 On tappets to the outside
5 Selector switch
6 Triangle