Denon AVR-786 - Manual (Page 28)

25
ENGLISH
ENGLISH
Basic Operation Basic Operation
• The audio delay setting does not apply when playing in the EXT.
IN mode or in the analog input direct or stereo mode.
3 Select Dolby/DTS Surround.
(Main unit) (Remote control unit)
4 Play a program source (DVD, etc.).
5 Press the CURSOR D D button.
• Switch to the Audio Delay adjustment screen.
6 Press the CURSOR F F or G G button to set the
delay time (0 ms ~ 200 ms).
With a movie source, for example, adjust so that the
movement of the actors’ lips is synchronized with the
sound.
7 Press the ENTER button to complete the setting.
Adjusting the audio delay
• When watching a DVD or other video source, the picture on the
monitor may seem delayed with respect to the sound. In this
case, adjust the audio delay to delay the sound and synchronize
it with the picture.
• The audio delay setting is stored separately for each input
source.
• This adjustment can be performed with the system setup
( page 42) or from the remote control unit, as described
below.
1 Select the input source.
Example: DVD
(Main unit) (Remote control unit)
2 Press the INPUT MODE button to set the input
mode to “AUTO”.
STANDARD/NIGHT
FUNCTION INPUT MODE
ENTER
STANDARD
FUNCTION
INPUT MODE
CURSOR
Night mode
When listening at night or at lower volumes, the night mode
improves listenability.
Press and hold the NIGHT button for several seconds
to enter the night mode.
• Canceling night mode:
Press and hold the NIGHT button again.
• The night mode only works when playing program sources
recorded in Dolby Digital or DTS.