Denon DVD-757 - Manual (Page 10)

Ver 2.01
Date : Nov.29.2005 10 page of 46
Copyright 2005 DENON Co.,Ltd.
1.6 List of command codes
Here is a list of command code types.
2Xh: POWER control command
3Xh: Command related to the acquisition of player information ( such as status and
name )
4Xh~5Xh: Operation instruction command to the player
No. Command Code (ASCII) Operation
1 Power ON 20h ([SP]) Power-on request from the standby state
2 Power OFF 21h (!) Power-off request
3 Request System Status 30h (0)
Acquires system status ( such as the entire player
and transfer unit ) .
4 Request CPU Version 31h (1) Acquires the CPU version.
5 Request Error Status 32h (2) Acquires the error code when an error is occurred.
6 Request Disc Status 33h (3) Disk number information is obtained.
7 Play 40h (@) Starts playback.
8 Stop 41h (A) Stops playback.
9 Pause 42h (B) Requests a pause.
10 Skip 43h (C) Moves to another group or title or chapter or track
11 Slow /Search 44h (D) Scan
12 Setup 45h (E) Common procedures of initial setting
13 Top Menu 46h (F) Playback top menu screen
14 Menu 47h (G) Playback Menu screen
15 Return 48h (H) Return
16 Audio 49h (I) Audio setting
17 Subtitle 4Ah (J) Subtitle setting
18 Angle 4Bh (K) Angle setting
19 Direct Select 4Ch (L) Music search mode
20 Cursor 4Dh (M) Moves cursor screen
21 Enter 4Eh (N) Decision
22 SACD Layer Select 4Fh (O) SACD Layer search mode
23 Disc Select 50h (P) Disc search mode
24 Disc Skip 51h (Q) Moves to another Disc