Generalmusic GM-X - Manual (Page 3)

M A N U A L I N D E X M A N U A L I N D E X
Introduction 1
Rear panel and connections 1
Getting started 2
Connect a speaker system 2
Power the expander 2
Connect to a PC 3
Connect to a PC via midi 3
Connect to a PC via usb 3
Connect a midi master controller 4
Connect pedals 4
Using the input connection 4
Start the gm-x 5
The default mode (gm2) 5
Listen to the demo sequence 5
Edit the default mode (gm2) 5
Selecting the parts (ch) in gm2 mode 6
Selecting the parameters to edit in the selected parts (ch): sound 6
Selecting the parameters to edit in the selected parts (ch): volume 6
Selecting the parameters to edit in the selected parts (ch): velocity 7
Selecting the parameters to edit in the selected parts (ch): transpose 7
Selecting the parameters to edit in the selected parts (ch): tune 7
Selecting the parameters to edit in the selected parts (ch): efx 7
Selecting the parameters to edit in the selected parts (ch): rev 8
The mode "ALL" in edit menu 8
The performance mode 9
Enter the performance mode 9
Select the performances 9
Manual recalling 9
Midi recalling 9
Edit the performance 10
Memorize the performance 10
Store the edit in the same performance location 10
Store the edit in a different performance location 10
Exit the performance store 11
Copy the performance 14
Memory management system 12
Common channel setting 12
Midi identification number 12
System reset 13
Midi data bulk dump 14
Sound list 15/16
Performance list 17/18
Midi implementation chart 19
Technical specifications 19