Generalmusic GM-X - Manual (Page 13)

Page 9
owners manual
gm-x
Performance - Performance +
MIDI MASTER KEYBOARD MIDI MASTER KEYBOARD
MIDI IN MIDI IN MIDI OUT MIDI OUT
MIDI MASTER KEYBOARD MIDI MASTER KEYBOARD
MIDI IN MIDI IN MIDI OUT MIDI OUT
1 1
4 4
7 7
- - 0 0
8 8
5 5
2 2
+ +
9 9
6 6
3 3
MIDI MASTER KEYBOARD MIDI MASTER KEYBOARD
MIDI IN MIDI IN MIDI OUT MIDI OUT
1 1
4 4
7 7
- - 0 0
8 8
5 5
2 2
+ +
9 9
6 6
3 3
THE PERFORMANCE MODE
The PERFORMANCE (PERF) mode is a very important gm-x operating level for live performance. This mode
allows you to program and recall up to 99 different set ups of the instrument in real time; a very useful
function controlling the gm-x from a MIDI master control (keyboard, accordion, guitar etc.).
Press the PERF button to enter the PERFOR-
MANCE selection menu.
ENTER THE PERFORMANCE MODE ENTER THE PERFORMANCE MODE
The data set up stored in the PERF mode are memorized after switching off the instrument.
The gm-x comes with a complete sets of live performances, programmed by the factory. These performances
allows you to feel the real sound power of this impressive instrument.
Some of these performance are programmed with multi split and layer, please set on ch. 01 the transmission
channel of your MIDI master controller in order to control all the PARTS used on the performance using a
unique MIDI transmission channel. See ahead for further details the chapter MIDI COMMON channel.
SELECT THE PERFORMANCES SELECT THE PERFORMANCES
Once the PERFORMANCE (PERF) mode is selected, it's possible to recall the internal performance in two
different ways.
MANUAL RECALLING MANUAL RECALLING
Press the DATA buttons to select the internal
performances
Please consult the PERF list at the end of the manual to see the per-
formance names and structure (single, layer, Split, etc.)
MIDI RECALLING MIDI RECALLING
From your MIDI controller send the MIDI Program Change corresponding to the PERFOMANCE you wish to
recall. (Program. Change from 01 to 99).
Please note the MIDI transmission channel of the MIDI controller has to be set to the MIDI ch. # 01
The way to transmit the MIDI Program Change can differ from one MIDI controller to another, please refer
to the owners manual of your MIDI controller in regards to this purpose.