Specifications, Table 18.1, Fig. 18.1 – EZ-ACCESS PASSPORT User Manual
Page 18: Fig. 18.2, Fig. 18.3, Fig. 18.4
Page 18 of
26
MODEL #:
PL52SP3651
PL52TP3860
PL72SP3651
PL72TP3860
TOWER WEIGHT:
216 lbs. (98 kg)
216 lbs. (98 kg)
247 lbs. (112 kg)
247 lbs. (112 kg)
PLATFORM WEIGHT:
168 lbs. (76 kg)
160 lbs. (73 kg)
168 lbs. (76 kg)
160 lbs. (73 kg)
NET WEIGHT:
384 lbs. (175 kg)
376 lbs. (171 kg)
415 lbs. (189 kg)
407 lbs. (185 kg)
TOWER HEIGHT WITH LEGS:
76-1/8” (1931 mm)
76-1/8” (1931 mm)
96-1/8” (2439 mm)
96-1/8” (2439 mm)
TOWER WIDTH WITH LEGS:
33-3/8” (84 cm)
33-3/8” (84 cm)
33-3/8” (84 cm)
33-3/8” (84 cm)
HEIGHT AT MAXIMUM TRAVEL:
97-9/16” (2464 mm)
97-9/16” (2464 mm)
117.75” (299.085 cm) 117.75” (299.085 cm)
PLATFORM “USEABLE” SIZE:
50.75” x 36”
(1289 mm x 914 mm)
59.75” x 36”
(1518 mm x 914 mm)
50.75” x 36”
(1289 mm x 914 mm)
59.75” x 36”
(1518 mm x 914 mm)
FOOTPRINT (RAMP DEPLOYED):
76" X 56"
(1930 mm x 1422 mm)
89" X 56"
(2261 mm x 1422 mm)
76" X 56"
(1930 mm x 1422 mm)
89" X 56"
(2261 mm x 1422 mm)
LANDING TO LANDING LIFTING
HEIGHT:
52”
(132.08 cm)
52”
(132.08 cm)
72”
(182.88 cm)
72”
(182.88 cm)
SPECIFICATIONS UNIVERSAL TO MODELS PL52SP3651, PL52TP3860, PL72SP3651 AND PL72TP3860
MOTOR:
.58 HP 24VDC
CONTROL VOLTAGE:
12 VDC
AC POWER REQUIREMENTS:
120 VAC @ .5 Amps
BATTERY CHARGER:
2 Amp
EMERGENCY OPERATION:
Manual hand crank
DRIVE SCREW LUBRICATION:
Chevron Ulti-plex® Synthetic Grease EP, NLGI Grade 1.5
TABLE 18.1
AC POWER
Use ONLY properly installed GFCI receptacles, seen FIG. 18.1 for example.
FIG. 18.1
FIG. 18.2
FIG. 18.3
FIG. 18.4
A correctly functioning AC Diagnostic Plug should indicate one of the following three situations:
Green LEDs indicate proper ground continuity and power status (FIG. 18.2).
Red LEDs indicate ground continuity loss or reversed polarity (FIG. 18.3).
No LED indicates open hot, open neutral, or hot to ground cross (FIG. 18.4).