beautypg.com

Peration getting started, Setting the time of day, Securing the controls – Dacor MCD User Manual

Page 5

background image

3

o

ven

o

peratIon

Getting Started

Before using your oven, become familiar with the features and

control panel layout (see pages 4 and 5).
Below the oven mode touch keys are three touch keys

labeled

CANCEL • SECURE, lIght and CooK tIme. the

CANCEL•SECURE key enables the user to cancel the selection

of an oven mode or delay timed program, or disable the control

panel. the

lIght key turns the interior oven light on and off. the

lIght key will remain functional if the control panel has been

disabled. the

CooK tIme key is used to select the length of time

for a cooking process in delay timed cooking mode.
Clock functions are selected by pressing the keys located below

the clock display and oven mode keys. oven functions are chosen

by pressing the key for the desired mode. once a clock or oven

function has been chosen, a description of the selection will flash

in the clock display area.
Important: after choosing a clock function or oven mode, you

have six seconds to perform the next programming step. if the

next step is not complete within six (6) seconds, the program

selection displayed on the clock will disappear. Should this occur,

just repeat the initial function selection.

oven features

Setting The Time Of Day

follow these two steps to set the correct time of day:

Press the

1.

CloCK key. the time of day will flash, “am” or

“pm” will be displayed, and “tIme” will flash in the display.
Press the key

2.

“+” or “–” until the correct time of day is

displayed and release.

Securing the Controls

to avoid accidentally turning the oven on, activate the secure

feature. Press and hold the

CANCEL • SECURE key for

approximately three seconds. Doing so will disable the control

panel and allow cleaning the controls without accidentally starting

any functions. three beeps will sound and

“off” will appear in

the display when the control panel has been secured.
to re-activate the control panel, again push and hold the

CanCel

• SECURE key for three seconds. three beeps will sound and

“off” will disappear from the display.

This manual is related to the following products: