Dukane 8064 - Manual (Page 8)

6
Preparations
Fastening the lens cover
WARNING ►Do not fasten the lens cover during use or immediately after
use. Handling while the projector is in a high temperature could cause a burn
and/or malfunction to the projector. Before operating, make sure that the power
switch is off, that the power cord is not plugged in, and that the projector is cool
adequately.
To avoid losing, please fasten the lens cover to the projector using the strap.
1.
Slowly turn over the projector, so that the bottom is facing up.
2.
Fix the strap to the strap ring of projector.
3.
Fix the strap to the strap ring of lens cover.
4.
Attach the lens cover to the lens of projector, and slowly turn over the
projector, so that the top is facing up.
Preparations
Strap ring
Projector (Bottom side)
Strap
Strap ring
Strap
Strap ring
(1) (2)
Lens cover
Strap
Strap ring
Strap
Strap ring
(1) (2)
Strap ring