EXFO FLS-5800 CD/PMD Analyzer Source - Manual (Page 85)

Instrucciones de control remoto
Fuente de analizador de CD/PMD 79
Instrucciones IEEE 488.2: Descripción
*REM
Description This command is used to set the Remote
programming state that determines if the source
will be controlled locally or remotely.
Syntax *REM
Parameter(s) RemoteState:
The program syntax data for is
defined as a element.
The special forms ON and OFF
are accepted on input for increased readibility.
ON corresponds to 1 and OFF to 0.
The parameter is the new
remote state of the Fuente de analizador de
CD/PMD:
“0”- to set Local state.
“1”- to set Remote state.
Example(s) *REM 1
Notes This command can only be used with RS-232
communication.