Eviant T7 Series - Manual (Page 15)

14
Display Options & Channel Setup
Start to Scan
Press the ▲ ▼ button to select Start to
Scan. Press the ► button to start scan.
The unit will automatically memorize the
available channels in sequence. When
completed the unit will tune the first
scanned channel. To stop scanning,
press Menu.
Auto Scan Add CH
Press the ▲ ▼ button to select Auto Scan
Add CH. This will search for any new channels that were not previously found.
Press the ► button to enter the menu (refer to the item “Auto Scan”)
Channel Skip
To delete channels, follow these steps:
Press the ▲ ▼ buttons to select Channel
Skip and press the ► button to enter the
menu as shown right:
Within this menu, press the ▲ ▼ buttons to
select the channel you want to skip and
press the ◄ ► button to select On or Off.
Press the MENU button to return to the
previous menu.
Channel No.
Press the ▲ ▼ button to select Channel No. and press the ◄► button to select
channel number. You can now customize the label for this channel as shown below.
Channel Label
Press the ▲ ▼ button to select Channel
Label.
Press the ► button to enter the menu.
Within this menu, press the ◄ ► button to
highlight position and press the ▲ ▼
button to select the desired character or
symbol to edit the Channel name.
Press the MENU button to return to the
previous menu.