Eviant T7 Series - Manual (Page 14)

13
Display Options & Channel Setup
Channel Setup
Each region has different broadcast channels. Your portable TV will scan for all the
channels in the area and remember each location. You can then go through and add or
delete channels individually as you prefer. When completed, pressing the up / down
channel buttons will take you through all of your selected channels in sequence.
Note: If you scan for broadcast channels (Air) and then switch to Cable TV, you
will need to re-scan. Your TV tuner can receive both analog and digital
signals.
Press the ◄ ► buttons to select .
Press the▲▼ buttons to select the desired
sub-menu.
Antenna / Cable
Press the ▲ ▼ buttons to select Antenna
Press the ◄ ► buttons to select CATV or
Air.
In the Air position, you can use the
telescoping antenna or another external antenna to pick up broadcast signals. See
below for CATV settings.
Auto Scan
1. First press MENU.
2. Navigate across using ► to the satellite icon.
3. Next navigate down using CH- to AUTO SCAN. Once green box is
highlighted, press ►.
4. Press ► to START TO SCAN.
Cable System
For cable stations, first set Antenna to
CATV above and then proceed as
follows:
Press the ▲ ▼ buttons to select Cable
System and press the ◄ ► buttons to
select AUTO, STD, IRC, HRC.
Note: this item is only enabled when
Antenna is set to CATV.