Intel(r) dual display clone, English – Eurocom L29xTP; TouchScreen PC User Manual
Page 24
18 - Video Features
Concise User’s Guide
English
Intel(R) Dual Display Clone
In addition to using a single display device, you can use Intel(R) Dual Display Clone Mode to drive two displays
with the same content. To enable Intel(R) Dual Display Clone Mode:
1.
Plug the external display into the external monitor port at the rear of the computer, and power it on.
2.
Go to the Intel(R) Extreme Graphics 2 control panel (see
) and select Devices (tab).
3.
Click Intel(R) Dual Display Clone (icon) in the Devices (tab).
4.
Choose one device to be the Primary/Secondary display.
5.
Click Apply > OK to confirm the settings change.
6.
Adjust the Color, Screen Area and Refresh Rate (of the Primary device only) by clicking Device Settings (button), and
Apply > OK to confirm.