Directed Electronics 4103 - Manual (Page 10)

10 © 2008 Directed Electronics. All rights reserved.
Transmitter Functions
The receiver uses a computer-based learn routine to learn the trans mit ter
buttons. The transmitter buttons indicated in all of the instructions in this
manual correspond to a Standard Configuration transmitter.
➢
Standard Configuration
�������
Button
The locking and panic functions are controlled by pressing
�������
on the
transmitter for one second.
�������
Button
The unlocking function is controlled by pressing on the transmitter
for one second.
Button
Silent Mode ™ and an optional auxiliary function are controlled by
pressing . Silent Mode works by pressing for less than one
second. The optional trunk release output is controlled by pressing and
holding
for 1.5 seconds.
Button
The remote start function of your system is controlled by pressing this
button for one second.
Buttons
+ +
When simultaneously pressed these buttons control the rear window
defogger during remote starting.