ENMET Ozone Generator - Manual (Page 6)

ENMET Corporation O ZONE G ENERATOR
2
2.0 O
ZONE
G
ENERATOR
Features Section
See Figure 1 for location of features
Feature Description
Flowmeter This Flowmeter allows the user to verify and monitor the flow rate of the Ozone
Generator. Proper flow rate, approximately 0.5 lpm(liter per minute).
Air Inlet Port Fitting for optional connection of inlet air.
Normally ambient room air is used.
Cal Gas Outlet Port Fitting for connection of tubing to the Ozone sensing unit or gas bag.
Power Switch Toggle switch
Operational Voltage: ƒ 110 V AC 50/60 Hz
ƒ 220 V AC 50/60 Hz (optional, must specify when ordering)
Figure 1: Ozone Generator Features
Blue Light
Ozone Output Adjustment
Glass Tube
Flowmeter
Calibration Gas
Outlet Port
Air Inlet Port
Power Switch