ENMET CP-60 - Manual (Page 5)

CP-60 ENMET Corporation
2
2.0 Instrument Features
2.1 CP-60 Exterior Features
The exterior of the instrument is shown in Figure 1. The exterior features are as follows:
Feature Description
Enclosure Engineered thermoplastic, approximately 11x9x6, with a clear hinged front cover.
Strain Relief Entrance for Power and wiring to Remote Sensor
Audio Alarm A loud horn activated by certain alarm conditions.
Mounting Flanges Flanges with holes for mounting the enclosure to a vertical surface.
2.2 Display CP-60 Front Panel Features
The display panel, shown in Figure 1, is viewed through the clear front cover of the enclosure, and is accessed by opening the
cover. Features are as follows:
Feature Description
Display 2 line, 16 character per line, LCD with backlight.
The numerical values of gas concentrations, and other information are displayed.
Visual
Alarms & Indicators On either sides of the display:
A red alarm LED for each sensor transmitter installed to the instrument, Alarm 1.
The top center:
A red alarm LED for all sensor transmitters, Alarm 2.
Near the center of the panel:
A green power indicator LED
A red fault alarm LED
Pushbutton Switches There are three of these, located near the center of the panel; they are yellow
rectangular membrane switches. They are:
•
OPTION Switch The top left switch.
•
SELECT Switch Directly to the right of the OPTION switch.
•
A UDIO D EFEAT /
A LARM A CKNOWLEDGE Switch
Directly below the OPTION switch.
Figure 1: CP-60 External Features
SELECT
Switch
Power LED
Fault LED
Alarm 2 LED
Display
OPTION
Switch
Alarm
DefePress
Punch out/Hole Plug
For External Wiring
Au
MAINTE
Front
Visual Alarm LED
4 places
Mounting Flanges
2 places
Strain Relief
2 to 4