D-Link DWL-G810 - Manual (Page 17)

17
Troubleshooting
If you are not using a DHCP capable router, or you need to assign a static IP
address, please follow these instructions:
This section provides solutions to situations that can occur during the installation and
operation of the DWL-G810 High-Speed Ethernet Wireless Bridge.
1. How do I assign a static IP address in Windows XP/2000?
Please note that routers will automatically assign IP addresses to the computers on the
network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using
a DHCP-capable router you will not need to assign static IP addresses.
Double-click on Control Panel.
Go to Start.
Double-click on Network Connections.