Signal flow, Function switches – EMM Labs DAC8 MKIV User Manual
Page 9
8
Signal Flow
Note: *SDIF2 inputs expect 24-bits (or 0-filled 16 bits) of PCM
Note: Analog outputs are balanced with pin 2 hot, pin 3 cold and pin 1 GND. For unbalanced
outputs just connect to pin 2 and leave pin 3 open ended
Function Switches
Clock Section
INT / EXT:
Selects internal or external clock source. LOCK LED is lit
when D/A converter is locked to external clock.
Sample Rate Section
1FS / 2FS:
Selects the sample rate for PCM data. FS is the base
frequency (see selector switch for base).
44.1 / 48:
Selects the base frequency (only 44.1kHz is allowed for
DSD outputs and inputs)
Digital Audio Input Section
IN / OUT:
Selects the data direction on the BNC connectors. DSD
and PCM data can be received or transmitted.
DSD / PCM:
Selects digital audio input format.
PCM to DSD
Conversion
D/A
DSD
PCM
RAW DSD / SDIF3
Optical
DSD
DSD
PCM
Analog
PCM* (SDIF2)
DSD (Optical)
PCM (AES/EBU)
DSD (RAW / SDIF3)
(shared Conn.)
(shared Conn.)
(shared Conn.)
(shared Conn.)