East Coast Supercharging ECS Stage X 1997-2003 Fuel System - Manual (Page 2)

It is your responsibility to make sure that your connections are correct and leak free. If you are unsure
of how to properly install AN fittings be sure to look it up as this is critical to your safety and the
performance and reliability of your fuel system.)
Measure and cut 24
inches of the provided
8AN Fuel Line. Install a
8AN 120deg fitting on
both ends of the line.
One end of this line will
attach to the new fuel
block, and the other to
the inlet side of the Fuel
pump.