EarthQuake W1265V User Manual

Page 14

Operator's Manual

Trail Warrior Quick Split 12-Ton Log Splitters

Check for parts online at www.getearthquake.com or call 800-345-6007 M-F 8-5

Figure 6

4. Mount ram/beam assembly onto uprights using 82mm

bolts. Tighten, but do not over tighten the lock nut as the

ram/beam assembly will use the bolt as a hinge.

Note: Holes in rear upright are elongated to assist in lining

up the upright holes during assembly. Tighten these fas-

teners securely. SEE FIGURE 5.

5. Place wheel onto axle, valve stem out. Place washer onto

axle and secure with snap ring. Repeat for the other axle. SEE

FIGURE 6.

6. Attach engine assembly with (1) each of 70mm bolt and

25mm bolt to axle assembly. Tighten locknuts using 13mm

wrenches.

7. (U.S. Version) Slide ram assembly to rear bracket and attach

with (4) 20mm bolts, locknuts and (2) retainer plates. SEE FIG-

URES 7 aND 8.

Figure 5

Figure 7

Figure 8