Ditch Witch RT120 Q - Manual (Page 100)

RT120Q Operator’s Manual
Trench - 99
Operation
CMW
Finish Trenching
1. When trench is complete, move ground drive hand control to neutral.
2. Adjust throttle to low idle.
3. Raise boom.
4. As boom clears top of trench, move attachment speed/direction control to neutral.
5. Raise trench cleaner.
6. Swivel seat to the drive position.
7. Disengage axle lock.
8. Drive a short distance away from work site. See page 78 for driving procedures.
9. Shut down tractor. See page 80 for proper shutdown procedures.
10. Stow trench cleaner.
IMPORTANT: Drive tractor in reverse 6’ (2 m) while turning steering wheel left to right to fully
disengage axle lock.