Display Devices Outdoor Enclosures - Manual (Page 2)

11/06
tel: 303.412.0399 www.displaydevices.com
fax: 303.412.9346 [email protected]
5880 Sheridan Blvd., Arvada, Colorado 80003
2
4. If your model has an internal articulating mount, cut zip ties and extend mount. Raise
flat panel and attach with enclosed hardware. If your model has a flat fixed mount,
mount on slots within the enclosure.
5. Determine cable path for power and signal cables. Use knockouts or add your own.
Attach power and signal cables following local building codes.
6. Remove protective paper on enclosure window and verify centering of display in the
window.
7. Clean the enclosure’s filters periodically (rinse with water or compressed air) to ensure
proper circulation. The filter locations are called out on the engineering drawings.