Denon AVR-4802R - Manual (Page 8)

- 8 -
EVENT PARAMETER function example
PS TONE DEFEAT ON PARAMETER setting PSTONE DEFEAT ON
TONE DEFEAT OFF TONE DEFEAT ON/OFF PSTONE DEFEAT OFF
SB:MTRX ON SURROUND BACK SP MODE set PSSB:MTRX ON
SB:NON MTR X ---MTRX ON = SURR.EX ON = DSCRT ON = NRML PSSB:NON MTRX
SB:OFF (@THX) (@ES DSCRT) (PL2, NEO6) PSSB:OFF
CINEMA EQ.ON CINEMA EQ. ON/OFF PSCINEMA EQ.ON
CINEMA EQ.OFF PSCINEMA EQ.OFF
MODE : MUSIC CINEMA / MUSIC /PL mode change PSMODE : MUSIC
MODE : CINEMA (This parameter can change DOLBY PL2,NEO:6 mode.) PSMODE : CINEMA
MODE : EMULATION ---Invalid at AVR-4802R PSMODE : EMULATION
MODE : PRO LOGIC --- EMU. & PL can change ONLY DOLBY PL2 mode. PSMODE : PRO LOGIC
TF UP TUNER Frequency UP/DOWN , direct change TFUP *
DOWN TFDOWN *
****** (6 digits) --- ****.** kHz at AM band (>050000 is AM.)
****.** MHz at FM band (<050000 is FM.)
TF105000
(1050.00kHz at AM)
TP UP TUNER PRESET CH UP/DOWN , direct change to No.** TPUP
DOWN TPDOWN
**(PRESET No.) TPA1
(PRESET No.”A1”)
TM TUNER BAND , MODE Select
AM ---Band set to AM TMAM
FM ---Band set to FM TMFM
AUTO ---Tuning mode set to AUTO mode TMAUTO *
MANUAL ---Tuning mode set to MANUAL mode TMMANUAL *
TF, TP, TM COMMAND : '*' parameters can NOT operate when INPUT source isn’t TUNER.