Denon AVR-4802R - Manual (Page 6)

- 6 -
COMMAND PARAMETER function example
Z2 PHONO MULTI ZONE -2 mode set , and select source Z2PHONO
| ---The name of PARAMETER is |
MD/TAPE2 the same as that of the time of SI COMMAND. Z2MD/TAPE2
SOURCE MULTI ZONE -2 mode cancel Z2SOURCE
UP MULTI ZONE -2 VOLUME UP/DOWN , direct change to ***dB Z2UP
DOWN Z2DOWN
** **:00 to 99 by ASCII , 80=0dB Z280
ON MULTI ZONE -2 ON/OFF change Z2ON
OFF Z2OFF
---Invalid at AVR-4802R
SR PHONO REC SELECT mode set , and select source SRPHONO
| ---The name of PARAMETER is |
MD/TAPE2 the same as that of the time of SI COMMAND. SRMD/TAPE2
SOURCE REC SELECT mode cancel SRSOURCE
SV DVD VIDEO SELECT mode set , and select source SVDVD
VDP SVVDP
TV SVTV
DBS/SAT SVDBS/SAT
VCR-1 SVVCR-1
VCR-2 SVVCR-2
VCR-3 SVVCR-3
V.AUX SVV.AUX
SOURCE VIDEO SELECT mode cancel SVSOURCE
SD AUTO set DIGITAL INPUT AUTO mode SDAUTO
PCM set DIGITAL INPUT force PCM mode SDPCM
DTS set DIGITAL INPUT force DTS mode SDDTS
RF set DIGITAL INPUT force RF mode SDRF
ANALOG set force ANALOG INPUT mode SDANALOG
EXT.IN-1 set EXT.IN -1 mode ---Set EXT.IN mode at AVR-4802R SDEXT.IN-1
EXT.IN-2 set EXT.IN -2 mode ---Invalid at AVR-4802R SDEXT.IN-2