Deltech Fitness HG935- Ultimate Lat Machine - Manual (Page 26)

INSTALL THE ROLLER PADS (H) ON THE ARMS (K,J). (NOTE IT MAY HELP TO TAKE A
DAMP CLOTH AND WET THE ARM BEFORE SLIDING THE PAD ON THE ARM)
NEXT INSTALL THE CAMS (E,F) ON THE ARMS. THERE IS A LEFT HAND AND A RIGHT
HAND SIDE SO YOU WILL NEED TO LOOK AT THE DIAGRAM TO ENSURE CORRECT
INSTALLATION
NOW INSERT THE 2” CAPS (O) INTO THE WEIGHT ARMS.
NOTE: THE WEIGHT ARMS HAVE BEEN TESTED AT THE FACTORY BEFORE SHIPPING TO
ENSURE THEY WILL FIT INSIDE THE CAM. THIS MAY CAUSE SOME SCRATCHING TO THE
PAINT ON THE WEIGHT ARM BOLT. THIS IS NOT SEEN AFTER INSTALLATION.
CAM & ARM PAD ASSEMBLY
F
E
O
K
J
H
H