Deltech Fitness HG935- Ultimate Lat Machine - Manual (Page 10)

ASSEMBLE THE 3 ½” PULLEYS (AA) INTO THE UPPER PULLEY FRAME (G) USING THE
M10 x 76MM BOLTS (FF), M10 NUTS (JJ) AND PULLEY BUSHINGS (BB). ( DO NOT
TIGHTEN AT THIS TIME- YOU WILL NEED TO REMOVE THEM TO INSTALL THE CABLE)
INSTALL THE 2” x 3” CAPS (V) INTO THE UPPER PULLEY FRAME (G).
UPPER PULLEY FRAME ASSEMBLY
(NOTE: THE NUTS USED ON THIS
BENCH ARE LOCK NUTS, THIS MEANS
YOU MUST TIGHTEN THEM DOWN
PAST THE PLASTIC INSERT.)
G
BB
BB
BB
BB
AA
AA
FF
FF
JJ
JJ
V
V